The wing is finished so it's time to start the fuselage.

You begin by adding the firewall and other bulkheads to one of the fuselage sides. Next you add the other fuselage side.

After adding the second fuselage side you add some triangle stock and doublers to strengthen the fuse.

Next is to sheet the bottom of the fuse from the trailing edge of the wing to the tail

Then you add the top fuse side sheet.

Time to install the servos and pushrods before the fuse gets Sheeted

Next install the specially shaped triangle stock along the inside of the top side sheeting 

Adding the cross grain bottom sheeting 

Starting to look like an airplane

Sheeting the front bottom of the fuse

Building the Fuel Tank Front Hatch

Here's a few pics of the hatch which covers the fuel tank compartment

On To The Covering